Mimaki CG-130SRIII

Extreme curve cutting speed

Affordably priced but technologically advanced.
Achieve the highest return on your investment.

Main Features

• A best-in-class cutting pressure of 500g for a wider range of materials
• Up to 2 times the curve cutting speed increases productivity
• Event Notification function for remote monitoring
  - Plot start/end, error/warning message
• Continuous Crop Mark Detection for precise stickers and seals.
  New Segment Compensation, which detects intermediate crop marks, enables accurate contour cutting of long-length prints
• Upgrade of firmware can be done quickly and easily by user.
• Ethernet connection for LAN use as well as USB2.0 and RS-232C

 

CG-60SRIII

Effective cutting area 606mm (23.8")

 

CG-100SRIII

Effective cutting area 1,070mm (42.1")

 

CG-130SRIII

Effective cutting area 1,370mm (53.9")

 

 

		CG-60SRIII	CG-100SRIII	CG-130SRIII
Acceptable sheet width		90～740 mm	90～1,250 mm	90～1,550 mm
Effective cutting area		606 mm	1,070mm	1,370mm
Maximum speed		Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range		1 - 10 cm/s (1 cm/s step adjustment), 1 - 70 cm/s（ 5 cm/s step adjustment）
Mechanical resolution		X direction: 2.5 μm、Y direction: 5 μm
Command resolution		25 μm or 10μm（ MGL-IIc） / 100 μm, 50 μm（ MGL-Ic1）
Repeatability *1		± 0.2 mm / 2 M
Effective Repeatability *2		586 mm × 2 M	1,050 mm × 2M	1,350 mm × 2M
Maximum pressure		500g
Range of down pressure	Cutter	10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 500g（10g step）
	Pen	10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 150g（10 g step）
Acceptable sheet *2		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool *3		Cutter, Ball-point pen
Type of command		MGL-IIC / MGL-Ic1
Interface		USB2.0、RS-232C、Ethernet
Receiver buffer size		27 MB Standard (When sorting, 17 MB)
Operational environment		5 - 35 ℃, 35 - 75 ％（Rh）, Non-condensation
Power requirement		AC 100 V - 240 V, 145 VA or less
Dimensions（W×D×H）		1,030 × 430 × 335 mm （1,030 × 430 × 1,185 mm）*4	1,530 × 580 × 1,150 mm	1,830 × 580 × 1,150 mm
Weight		24kg	41kg	46kg
Stand		Optional equipment	Standard equipment	Standard equipment

*1: Except for media expansion and contraction due to temperature.
*2: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4: When equipped with the optional stand (OPT-0231)

Model

CG-60SRIII	Effective cut width: 606 mm (23.8")
CG-100SRIII	Effective cut width: 1,070 mm (42.1")
CG-130SRIII	Effective cut width: 1,370 mm (53.9")