To be used with: Roland SP-540VRemark: OriginalPart No.: This is the original Roland part ( number 6087670000 replacing 7876705100 ).Warm Tip: This is an empty board, and no program.Gorss Weight: 1kg..

PressVu 200 (PV200) Printhead - Jetpack - AA90646 - Fits EFI/VUTEk PrintersVUTEk Part #: AA90646Prime Printer Service Part #: PPS-AA90646This Print Head/Jetpack fits the following models:PressVu 200 (PV200)..

The Pro-Lam PL1200HP Pocket Rocket 12 inch Roll Laminator is a high performance and high speed commercial application 12" roll laminator that includes a foam board mounting capability of 1/4 inch. This high quality roll laminator was can laminate films from 1.2 mil to 15 mil in thickness. The Pro-Lam PL1200 isdesigned for the on demand print ma..

The Pro-Lam PL-238WF 38" Wide Format Roll Laminator is a feature rich high performance roll laminator ideal laminating large and wide format output. Made-in-the-USA the PL238WF roll laminator is a durably built commercial laminator with a 38 inch wide laminating width capacity utilizing laminating films from less than 1 mil to 10 mil in thic..

The Pro-Lam PL-244WF 44" Wide Format Roll Laminator is a feature rich high performance roll laminator ideal laminating large and wide format output. Made-in-the-USA the PL244WF roll laminator is a durably built commercial laminator with a 44 inch wide laminating width capacity utilizing laminating films from less than 1 mil to 10 mil in thickn..

The Pro-Lam PL227HP 27" Roll Laminator is a high quality commercial feature rich roll laminator designed for on-demand print centers, copy shops and more. Capable of 16 feet per minute lamination utilizing laminating films up to 10 mil in film thickness and a mounting capability of 1/4 inch the Pro-Lam PL227HP is the ideal commercial laminating sol..

Prusa i3 Plus is the newest design of upgradable 3D printer with many improvements. All parts of this 3D printer are Open Source and are part of the RepRap project. Now you have a great opportunity to buy one directly from the author Josef Průša and support it's further development.  Original Prusa i3&nb..

Ricoh G5S (MH5220) UV Printhead - J35000Manufacture: Ricoh..

Matan / UViStar Pro8 Hitachi / Ricoh Gen 3 E3 PrintHeadMatan P/N: U1020035Ricoh P/N: 338678-003Printers:MatanMatan Barak 3Matan Barack 5FujifilmUviStar Pro 8UviStar Pro 8W..

Ricoh Gen3 15PL / 30PL / 45PL PrintheadPart NO: 338689-001S/N: 109080102Vpp: 20.62V..

Ricoh Gen4 / 7PL printheadThe Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN4 is available in 44cm long cable length.To be used with: Agfa :Jeti 12..

Manufacturer: RicohTechnical Specifications- Size: 13,2 x 120 x 75,5 mm (excluding cables)- Head Materials: SST, Ni and Epoxy Adhesive (direct contact with ink)- Nozzle Plate Surface: Non-wet coating- Number of Nozzles: 2 x 192 nozzles- Nozzle Spacing: 0,1693 mm- Piezo Type: D33 Stacked PZT- Temperature Control: Integrated Heater and Thermistor- Op..

Ricoh Gen5 / 7PL printheadTo be used with: Handtop, Docan Flatbed UV PrintersRemarks: original..

Ricoh Gen5 / 7PL Printhead, Water-based,  52cm Long with The Head,  39cm Long for The Cable (Two Color, Long Cable)Manufacturer: RicohThe new number is J36004 replacing N221414D /221414F /221414K /221414P /221414C..

Ricoh Gen5 / 7PL Printhead, Water-based, 24.8cm Long with The Head, 14cm Long for The Cable (Two Color, Short Cable)-J36002Remarks: Original..